P72.20-2674-07
1 Screw
2 Screw
4 Rear-end door
3 Door hinge
P72.20-2718-08
4 Rear-end door
6 Roof paneling
5 C-pillar outer cover
| Checking | ||
1 | Check dimensions gaps on rear-end door (4) | The rear-end door (4) should be located at the same height as the roof paneling (6) in the marked areas (C arrows); furthermore, the gap dimensions (B arrows) should be the same in relation to the C-pillar outer covers (5) on both sides. | |
CBS rear end to top rear-end door | |||
Outer cover to upper rear-end door | |||
Bottom rear-end door to top rear-end door | |||
Roof paneling to rear spoiler | |||
| |||
Adjust | |||
2 | Open rear-end door (4) and loosen bolts (arrows A) as well as bolts (1, 2) at door hinges (3) | ||
3 | Close rear-end door (4) and check gap dimensions on rear-end door (4); adjust if necessary. | The rear-end door (4) should be located at the same height as the roof paneling (6) in the marked areas (C arrows); furthermore, the gap dimensions (B arrows) should be the same in relation to the C-pillar outer covers (5) on both sides. | |
CBS rear end to top rear-end door | |||
Outer cover to upper rear-end door | |||
Bottom rear-end door to top rear-end door | |||
Roof paneling to rear spoiler | |||
| |||
4 | Open rear-end door (4) and tighten bolts (arrows A) as well as bolts (1, 2) at door hinges (3) | Ensure that the adjusted position of the rear-end door (4) does not change. | |
| |||
| |||
5 | Close rear-end door (4). |
Check values for gaps
Number | Designation | Model 451.3 | |||
BE60.00-P-1006-01V | Gap dimension | CBS rear end to B-pillar | Dimension "AA" | mm | 1 (1) |
CBS rear end to taillamp | Dimension "AB" | mm | 1 (1) | ||
CBS rear center part to fender | Dimension "AC" | mm | 3 (0.5) | ||
CBS rear end to bottom rear-end door | Dimension "AD" | mm | 5 (2) | ||
CBS rear end to top rear-end door | Dimension "AE" | mm | 7 (2.5) | ||
CBS rear end to cover | Dimension "AF" | mm | - | ||
See picture | |||||
BE60.00-P-1007-01V | Gap dimension | Outer cover to CBS rear end | Dimension "AG" | mm | 6 (2) |
Outer cover to B-pillar | Dimension "AH" | mm | 4 (1.5) | ||
Outer cover to roof paneling | Dimension "AI" | mm | 5 (1.5) | ||
Outer cover to upper rear-end door | Dimension "AJ" | mm | 5 (1.5) | ||
See picture | - | ||||
BE60.00-P-1009-01V | Gap dimension | Bottom rear-end door to top rear-end door | Dimension "AO" | mm | 7 (2.5) |
See picture | |||||
BE60.00-P-1010-01V | Gap dimension | Roof paneling to rear spoiler | Dimension "AP" | mm | 6 (2) |
Roof paneling to windshield | Dimension "AQ" | mm | 5.5 (3.5) | ||
roof paneling (full roof) to side roof frame | Dimension "AR" | mm | 6 (1.5) | ||
roof paneling (panoramic roof) to side roof frame | Dimension "AR" | mm | 5 (1.5) | ||
See picture | |||||
Rear-end door
Number | Designation | Model | |
BA72.20-P-1005-02F | Bolt, hinge of rear-end door upper section to body | Nm | 12 |
BA72.20-P-1006-02F | Bolt, hinge to glass pane | Nm | 12 |
Feeler gauge
452 589 01 21 00