Remove/install rear-end door

AR72.20-P-3500MCC

Remove/install rear-end door

22.3.07

 

Remove/install

1

Remove door paneling from rear-end door (1).

AR72.20-P-1000MCC

2

Remove covers (4) from left and right door lock on rear-end door (1).

3

Separate electrical connector (5)

 On model 451.3 the electrical connector (5) is located in the marked area (arrow).

4

Disconnect electrical connector from rear-end door CL motor (M14/7)

5

Loosen retaining clamp (2) from rear-end door wiring harness (3) and expose rear-end door wiring harness (3) on rear-end door (1).

6

Loosen grommet (6) on rear-end door (1)

7

Open rear-end door (1) and loosen bolt (8) on left and right door check strap on rear-end door (1).

 The bolt (8) remains on the corresponding door check strap.



*BA72.20-P-1002-02F

8

Lift load compartment floor covering, unscrew nut (7) on left and right hinge on rear-end door (1) and remove rear-end door (1).



*BA72.20-P-1003-02F

9

Remove rear-end door CL motor (M14/7)

When replacing rear-end door (1).

AR80.20-P-4005MCC

10

Remove inner cover from rear-end door (1)

When replacing rear-end door (1).

AR72.20-P-0001MCC

11

Remove door locks on rear-end door (1).

When replacing rear-end door (1).

Door lock on upper rear-end door on model 451.3

AR72.20-P-2550MCC

Door lock on lower rear-end door on model 451.3

AR72.20-P-2550MCD

Model 451.4

AR72.20-P-2550MCO

12

Unclip cable on rear-end door (1) and remove.

When replacing rear-end door (1).

 On model 451.3 only one cable is installed on the rear-end door (1).

13

Remove foam rubber insert for arresting removed side supports from rear-end door (1).

When replacing rear-end door (1) on model 451.4.

14

Install in the reverse order

15

Adjust rear-end door (1)

AR72.20-P-3510MCC

Number

Designation

Model
451.3

Model
451.4

BA72.20-P-1002-02F

Bolt, check strap to lower rear-end door lock

Nm

20

20

BA72.20-P-1003-02F

Nut, lower rear-end door hinge to body

Nm

43

43