Removing and installing outer door handle for sliding door

Typ ar · téma 72.16 · verze 0110 · 2003-09-18

Platí pro: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66 except CODE (T93) Omission of load compartment sliding door MODEL WD1, WD2, WD3, WD6, WD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (T93) Omission of load compartment sliding door MODEL 690.63 /64

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

AR72.16-D-2220A

23.11.95

MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66 except CODE (T93) Omission of load compartment sliding door

MODEL WD1, WD2, WD3, WD6, WD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (T93) Omission of load compartment sliding door

MODEL 690.63 /64

Removing and installing outer door handle for sliding door

D72.16-0013-09

1 Sliding door

10 Door handle

12 Torx bolt

11 Covering cap

 	Remove/Install
1	Remove cap (11).
2	Remove bolt (12) for door handle (10).		*BA72.16-N-1001-01A
3	Push door handle (10) backwards and remove.	 Installation: Insert door handle (10) and slide toward rear so that the 3 catch points (arrows) engage on both sides.
4	Install in the reverse order

 Sliding doors

Number	Designation		Models 690.6, 901, 902, 903, 904	Models WD1/WD2/ WD3/WD6/ WD7/YD1/ YD2/YD3/ YD4/YD5/ YD6/YD7


BA72.16-N-1001-01A	Screw for door handle on sliding door	Nm	10	10