AR72.12-P-1010PM | Remove/install rear door lining | 15.3.10 |
MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS6) Special protection version FB6
MODEL 463.236 /248
with CODE (979) Special protection version
with CODE (ZS7) Special protection version FB7
P72.12-2206-06
1 Door handle
2 Inside door opener
3 Bolts
P72.12-2151-01
6 Clips
8 Electrical connector
S51/3 Left rear HS [SIH] switch
S51/4 Right rear HS [SIH] switch
P72.12-2207-01
| Remove/install | ||
1 | Unclip screw cap from door handle (1) | ||
2 | Remove door handle (1). | ||
3 | Remove inner door actuation (2) from rear door | with a wheelbase of 2850 mm | |
4 | Remove bolt (3) | ||
5 | Remove door lining | Unclip door lining with assembly wedge. Check clips (6) for damage, replace if necessary. | |
| |||
6 | Remove door lining from upper window frame cover | Remove door lining downward. | |
7 | Disconnect electrical connector (8) left rear seat heater switch (S51/3) or right rear seat heater switch (S51/4) | ||
8 | Disconnect electrical connector from ambiance illumination | Only on vehicles with code (FR1) Ambiance illumination | |
Danger! | Risk of poisoning caused by inhaling vapors or swallowing adhesive. Risk of injury caused by adhesive coming into contact with skin and eyes | Wear respiratory protection, protective gloves and safety glasses. Pour adhesive into suitable and appropriately marked containers only. | |
9 | Check door protection foil | Installation: Replace door protection foil, if required. Apply adhesive when installing. | |
10 | Install in the reverse order |
Mounting wedge
110 589 03 59 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1003-02A | Adhesive/Dekalin 3649 | A 000 989 82 71 |
Odkazované dokumenty
- ar7212p2310gn Demontáž, montáž vnitřního ovládání zadních dveří
- as0000z001601a Nebezpečí otravy při vdechnutí výparů nebo při požití lepidla. Nebezpečí poranění při kontaktu lepidla s kůží a očima