P72.12-2876-09
Shown on model 218.3
1 Door lining
2 Screw
3 Cover
4 Screw
5 Mounting clip
H4/80 Left rear door sound system midrange speaker
H4/81 Right rear door sound system midrange speaker
N69/3 Left rear door control unit
N69/4 Right rear door control unit
6 Rear door
7 Locking knob
8 Lock button Bowden cable
9 Electrical connector
10 Inside door opener Bowden cable
11 Electrical connector
12 Inner door handle
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Unscrew bolt (2) | ||
2 | Remove bolts (4) | ||
3 | Unclip door lining (1) from mounting clips (5) on rear door (6) | Carefully position assembly wedge directly next to mounting clip (5) starting at upper rear edge of door, ensure that surface of door lining (1) is not damaged from assembly wedge. | |
| |||
4 | Detach door lining (1) from rear door (6) horizontally to side until electrical connectors (9) on left rear door control unit (N69/3), right rear door control unit (N69/4), inside door opener Bowden cable (10) and Bowden cable lock button (8) are accessible. | Carefully detach door lining (1). Danger of breaking mount on Bowden cable end safety cap (8). | |
Installation: Ensure that door lining (1) is seated correctly in inner sealing frame. | |||
5 | Press shackles together (arrows) and unclip Bowden cable lock button (8) from door lining () | ||
6 | Disconnect electrical connectors (9) from left rear door control unit (N69/3) and right rear door control unit (N69/4) | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
7 | Unhook inside door opener Bowden cable (10) from inner door handle (12). | ||
8 | Disconnect electrical connector (11) from left rear door sound system midrange speaker (H4/80) or right rear door sound system midrange speaker (H4/81) | With code (810) Sound system | |
9 | Remove door lining (1) | ||
10 | Install in the reverse order |
Snap-release tool
452 589 01 63 00
Odkazované dokumenty
- ah5400p000101a Upozornění k zamezení poškozením elektronických součástí elektrostatickým výbojem
- as0000z001101a Nebezpečí poranění prstů přivřením nebo pohmožděním při demontáži, montáži a seřizování kapoty, dveří, krytů a posuvného střešního okna