AR72.12-P-1010AK | Remove/install rear door lining | 1.3.07 |
Model 169.0, 245.2 with CODE (584) Rear power windows (2 doors)
P72.12-2633-09
Shown on model 169.0 with code (955) Elegance
1 Door lining
2 Covering
3 Clip
4 Electrical connector
S21/3 Left rear power window switch
S21/4 Right rear power window switch
5 Electrical connector (only model 169.0)
6 Release cable
7 Inside door opener
8 Bolts
Modification notes
| Remove/Install | ||
1 | Completely lower crank window | ||
2 | Unclip covering (2) | ||
3 | Remove bolts (8) | Installation: Apply screw securing agent to bolt thread (8) | |
| |||
Loctite 262 | |||
4 | Unclip door lining (1) from clips (3) with mounting wedge | | |
Installation: Replace damaged clips (3). | |||
5 | Remove door lining (1) upward from rear door until electrical connectors (4, 5) are accessible | Electrical connector (5) only on model 169.0. | |
6 | Disconnect electrical connector (4) from left rear power window switch (S21/3) or right rear power window switch (S21/4) | ||
7.1 | Disconnect electrical connector (5) from left rear door entrance/exit lamp or right rear door entrance/exit lamp. | On model 169.0 with code (955) Elegance | |
8 | Unclip release cable (6) from inner door actuation (7) and remove door lining (1) | ||
9 | Install in the reverse order |
Rear door
Mounting wedge
110 589 03 59 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1059-02A | Loctite 262 | Henkel Loctite Deutschland GmbH |