W72.10-0008-09
1 Arresting ring
2 Window crank
3 Paneling inner section
4 Screws
9 Door opening lever
10 Retaining lugs
11 Spreading plugs
5 Door liner
6 Retaining lugs
7 Cover flap
8 Actuating rod
| Removal, installation | ||
1 | Move arresting ring (1) for window crank (2) in direction of arrow (arrow A) | Version with manual window cranks | |
2 | Remove window crank | ||
3 | Pull paneling inner section (3) off of door liner (5) at upper edge | Remove spreading plugs (11) from holes individually. | |
4 | Slide paneling inner section in direction of arrow (arrow B) and remove | Installation: Position all retaining lugs (10) behind edge of door liner. | |
5 | Remove screws (4) for door liner | ||
6 | Pull door liner (5) up horizontally until the retaining lugs (6) are released from the recesses | Installation: Position all retaining lugs in recesses provided. | |
7 | Pivot door liner toward front | ||
8 | Open cover flap (7) for door opening lever on inside of door liner and unhook actuating rod (8) from door opening | ||
9 | Remove door liner | ||
10 | Reinstall in opposite order |