P72.10-2886-09
Shown on right front door
1 Door lining
2 Bolts
3 Cover
7 Armrest cover
8 Bolts
4 Mirror triangle cover
5 Bolt
6 Door lock cover
P72.10-2893-07
Shown on right front door
1 Door lining
9 Clip
10 Bracket
N69/1 Left door control unit
N69/2 Right door control unit
11 Control cable
12 Inside door handle
13 Electrical connectors
| Remove/Install | ||
1 | Lower window in left or right front door | See Operating Instructions | |
2 | Unscrew bolts (2) and remove cover (3) | ||
3 | Remove mirror triangle cover (4) from front door | ||
4 | Unscrew bolt (5) and remove door lock cover (6) | Installation: Guide for door lock cover (6) should engage in inner door panel. | |
5 | Unclip armrest cover (7) with mounting wedge (arrow) and unscrew bolt (8) below | | |
Installation: First position armrest cover (7) on door liner (1) and then clip into armrest upward | |||
6 | Press door liner (1) off of mounting clips (9) on inner door panel from front to rear with mounting wedge | Move mounting wedge (9) directly onto each retaining clip (9) and ensure that the retaining lugs of the mounting clips do not tear out of the door liner . | |
| |||
Installation: Replace damaged mounting clips (9). | |||
7 | Lift door liner (1) upward out of inner sealing rail and simultaneously pull away from lower inner door panel. | Installation: Bracket (10) for door liner (1) should engage on inner door panel | |
8 | Lift door liner (1) off of inner door panel until control cable (11) is accessible. | ||
9 | Unhook control panel (11) from inner door handle (12). | ||
10 | Disconnect electrical connectors (13) from left door control module (N69/1) or right door control module (N69/2) | ||
11 | Remove liner (1) | ||
12 | Install in the reverse order |
Mounting wedge
110 589 03 59 00