P72.10-3330-09
1 Door lining
2 Mirror triangle cover
3 Door control unit cover
4 Electrical connectors
9 Covering
N69/1 Left door control unit
N69/2 Right door control unit
5 Bolt
6 Mounting clips
7 Inner door opener
8 Carrier
| Remove/install | ||
1 | Wind crank window fully down | ||
2 | Remove cover (9) | ||
3 | Unclip mirror triangle cover (2) and lay down to side with electrical line connected. | | |
4 | Unclip door control unit cover (3) from door lining (1). | | |
5 | Disconnect electrical connectors (4) from left door control unit (N69/1) or right door control unit (N69/2) | ||
6 | Unscrew bolt (5). | ||
7 | Press door lining (1) on mounting clips (6) off of inner door panel. | Move assembly wedge directly to mounting clips (6) and ensure that the retaining tabs on the mounting clips (6) do not tear out of the door lining (1) | |
| |||
8 | Remove door lining (1) upward from inner sealing rail and remove from inner door panel until inner door opener (7) is accessible on rear of door lining (1). | Installation: Ensure that carrier (8) is seated correctly in corresponding openings in inner door panel. | |
9 | Unhook Bowden cable on inner door opener (7) at rear side of door lining (1). | ||
10 | Remove door lining (1) | ||
11 | Install in the reverse order |
115 589 03 59 00
Long wedge
Wedge tool
110 589 03 59 00