Removing and installing front door liner

AR72.10-P-1000P

Removing and installing front door liner

17.9.99

 

Removing, installing

1

Position assembly wedge at top of door handle (1) and press off

Model 203.0 / 203.2

 Press not more than 10 mm out of the catch.

 Assembly wedge

*110589035900

2

Position assembly wedge at bottom of door handle (1) and press off

Model 203.0 / 203.2

 Assembly wedge

*110589035900

3

Take out door handle (1)

Model 203.0 / 203.2

4

Unclip SRS cover

5

Unscrew screws (2)

6

Unhook front entrance and exit lamp and disconnect connector

With code (611) 2 exit lamps in front doors

 Left front door entrance and exit lamp (E17/3), right front door entrance and exit lamp (E17/4).

7

Remove door mirror triangle speaker

With code (810) sound system

 Left front door mirror triangle speaker (H4/23), right front door mirror triangle speaker (H4/24).

AR82.62-P-7850P

8

Remove lock trim surround (3)

 Torx bit set

*000589011000

9

Press door liner (4) off of inner door panel at bottom, front and rear in area of clips (5) with assembly wedge

 Inspect clips for damage.

 Assembly wedge

*110589035900

10

Use assembly wedge to lift top of door liner (4) out of inner sealing rail

 Assembly wedge

*110589035900

11

Unhook control cable (6) from inner door actuation

12

Detach connectors (7)

On left front door control module (N69/1), right front door control module (N69/2).

13

Lay door liner (4)down

14

Install in the reverse order