P72.10-3872-09
1 Door lining
2 Mirror triangle paneling
3 Screw
4 Cover
5 Screw
6 Mounting clip
H4/72 Left front door sound system midrange speaker
H4/73 Right front door sound system midrange speaker
N69/1 Left front door control unit
N69/2 Right front door control unit
7 Front door
8 Locking knob
9 Inside door opener Bowden cable
10 Electrical connector
11 Inner door handle
12 Electrical connector
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Remove mirror triangle paneling (2) and allow to hang down with electrical line connected | | |
2 | Unscrew bolt (3) | ||
3 | Remove bolts (5) | ||
4 | Unclip door lining (1) from mounting clips (6) on front door (7) | Carefully position assembly wedge directly next to mounting clip (6) starting at upper rear edge of door, ensure that surface of door lining (1) is not damaged from assembly wedge. | |
| |||
5 | Horizontally loosen door lining (1) to side from front door (7). Guide lock button (8) out of door lining (1). | Loosen door lining (1) from front door (7) until electrical connectors (10) on left front door control unit (N69/1) or right front door control unit (N69/2) and inside door opener Bowden cable (9) are accessible. | |
Installation: Ensure that door lining (1) is seated correctly in inner sealing frame. | |||
6 | Disconnect electrical connectors (10) from left front door control unit (N69/1) or right front door control unit (N69/2) | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
7 | Unhook inside door opener Bowden cable (9) from inner door handle (11). | ||
8 | Disconnect electrical connector (12) from left front door sound system midrange speaker (H4/72) or right front door sound system midrange speaker (H4/73) | With code (810) Sound system | |
9 | Remove door lining (1) | ||
10 | Install in the reverse order |
Snap-release tool
452 589 01 63 00
Odkazované dokumenty
- ah5400p000101a Upozornění k zamezení poškozením elektronických součástí elektrostatickým výbojem
- as0000z001101a Nebezpečí poranění prstů přivřením nebo pohmožděním při demontáži, montáži a seřizování kapoty, dveří, krytů a posuvného střešního okna