Remove/install front door lining

AR72.10-P-1000AK

1.3.07

MODEL 169.0, 245.2

P72.10-3179-09

Shown on model 169.0

1 Door lining

2 Covering

3 Clip

4 Electrical connector (on model 169.0 with code (954) Avantgarde or code (955) Elegance, on model 245.2 with code (876) Interior lights package)

5 Electrical connector

E17/4 Right front door entrance, exit and warning lamp (on model 169.0 with code (954) Avantgarde or code (955) Elegance, on model 245.2 with code (876) Interior lights package)

6 Release cable

7 Inner door actuation

9 Screwdriving

E17/3 Left front door entrance, exit and warning lamp (on model 169.0 with code (954) Avantgarde or code (955) Elegance, on model 245.2 with code (876) Interior lights package)

P72.10-3167-07

1 Door lining

8 Clip

 	Remove/install
1	Completely lower front crank window
2	Remove mirror triangle cover from front door		AR72.10-P-3001AK
3	Unclip panel (2)
4	Remove bolts (9)		*BA72.10-P-1008-01L
		 Installation: Apply screw securing agent to bolt thread (9)
		Loctite 262	*BR00.45-Z-1059-02A
5	Release catch hook (arrow A) on clip (8) with suitable screwdriver and pull clip (8) out of door lining (1).	 The catch hook (arrow A) is located behind the spot marking (arrow B).
		 Installation: Replace damaged clip (8). observe installation position: The dot (arrow B) on the clip (8) should point toward the center of the vehicle
6	Unclip door lining (1) from clips (3) with mounting wedge		*110589035900
		 Installation: Replace damaged clips (3).
7	Remove door lining (1) upward from front door until electrical connectors (4, 5) are accessible	 Electrical connector (4) only on model 169.0 with code (954) Avantgarde or code (955) Elegance and on model 245.2 with code (876) Interior lights package.
8.1	Disconnect electrical connector (4) on left front door entrance, exit and warning lamp (E17/3) or right front door entrance, exit and warning lamp (E17/4)	On model 169.0 with code (954) Avantgarde or code (955) Elegance and on model 245.2 with code (876) Interior lights package.
9	Disconnect electrical connector (5) from driver power window, outside mirror adjustment and CL switch group or front passenger power window switch
10	Unclip release cable (6) from inner door actuation (7) and remove door lining (1)
11.1	Disassemble/assemble door lining (1)	Only when replacing door lining (1).	AR72.10-P-1030AK
12	Install in the reverse order

 Front door

Number	Designation		Model 169, 245


BA72.10-P-1008-01L	Bolt, door line to door module	Nm	7

Mounting wedge

110 589 03 59 00

Repair materials

Number	Designation	order number
BR00.45-Z-1059-02A	Loctite 262	Henkel Loctite Deutschland GmbH Arabellastrasse 17 81925 München Germany Tel. +49-899268-0 Fax +49-899101978 www.Loctite.de

Odkazované dokumenty