D72.10-0001-06
1 Door lock
2 Motor (central locking)
3 Release cable
4 Torx bolt
5 Rubber grommet
6 Connector (light blue)
7 Connector (yellow)
| Remove/Install | ||
1 | Remove door trim panel | Model 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4. | |
Model 901.6, 902.6, 903.6, 904.6, 905.6, 690.6 with code V50, two electric power windows | |||
Model 901.6, 902.6, 903.6, 904.6, 905.6, 690.6 except code V50, two electric power windows | |||
2.1 | Pull out rubber grommet (5) between door and A-pillar, unplug connectors (6, 7) and expose cable | With code FZ0/FZ1, central locking. Installation: Observe routing of electric leads. | |
3 | Unscrew torx bolts (4) for door lock (1) | Installation: Replace self-locking Torx screws (4). | |
| |||
| |||
4 | Remove door lock (1) from front door | Installation: Ensure that the lever (arrow) of the door lock is positioned behind the door handle lever. | |
5 | Detach release cable (3) from door lock (1) | ||
6 | Install in the reverse order |
Hinged doors
Number | Designation | Model | ||
BA72.15-N-1011-01A | Bolt, door lock to hinged door | Nm | 10 | |
000 589 01 10 00
Torx bit set