Remove/install rear mounting wall

AR68.74-P-1000QA

Remove/install rear mounting wall

10.3.03

 

Remove/install

 Danger!

Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating range of the mechanism when components are in motion.

AS00.00-Z-0009-01A

 Danger!

Risk of injury when performing check and repair work in area of roll bar

Before working in the area of the roll bar, pull out the rear head restraints by hand.

Keep body parts out of the area where the roll bar extends.

AS91.00-Z-0003-01QA

1

Open soft top compartment cover

2

Cover vehicle in rear area

 To prevent scratching the paint during assembly work.

3

Remove retractable trunk partition

AR68.50-P-3000QA

4

Remove trunk paneling in area of assembly rear wall

AR68.30-P-4600QA

5

Unscrew bolt (2)

 Installation: Before tightening, position all bolts (2).

Bolt, rear mounting wall to body

*BA68.74-P-1001-01A

 Torx bit set

*000589011000

6

Remove assembly rear wall (1) through soft top compartment upward

 When removing assembly rear wall, ensure that paint is not damaged by scratching.

7

Install in the reverse order

Number

Designation

Model 209.4

BA68.74-P-1001-01A

Bolt, rear mounting wall to body

Nm

8 (1 )