AR68.30-P-4810V | Remove/install center paneling in trunk | 9.9.10 |
MODEL 171.4
Bottom center trunk paneling
P68.30-2848-06
1 Bottom center trunk paneling
2 Spare tire well cover
3 Expansion clip
4 Navigation processor paneling
(with code (527) COMAND APS (with navigation system) or with code (529) HIGH Class Japan or with code (530) COMAND APS USA (with navigation system))
5 Expansion clip
(with code (527) COMAND APS (with navigation system) or with code (529) HIGH Class Japan or with code (530) COMAND APS USA (with navigation system))
| Remove/install | ||
1 | Open retractable trunk partition | ||
2 | Remove spare tire well (2) from trunk | ||
3 | Remove left and rightexpansion clip (5) from navigation processor paneling (4) and remove navigation processor paneling (4) | On vehicles with code (527) COMAND APS (with navigation system) or with code (529) HIGH Class Japan or with code (530) COMAND APS USA (with navigation system) | |
4 | Remove expansion clips (3) | On vehicles with code (527) COMAND APS (with navigation system) or with code (529) HIGH Class Japan or with code (530) COMAND APS USA (with navigation system) an expansion clip is located below the navigation processor paneling (4) in addition. | |
5 | Loosen bottom center trunk paneling (1) from guides (arrows) and pull toward rear | Installation: Ensure that bottom trunk center paneling (1) is seated properly in guides (arrows). | |
6 | Remove bottom center trunk paneling (1) from trunk | ||
7 | Install in the reverse order |