P68.30-3676-09
1 | Load compartment floor | 3 | Screw | ||||
2 | Rear center section paneling | 4 | Tie-down eye |
P68.30-3677-09
5 | Right cover | 7 | Expansion rivet | ||||
6 | Left cover | E18/5 | Left luggage compartment lamp |
| Remove/install | ||
1 | Remove rear center section paneling (2) | ||
2 | Remove load compartment floor (1) out of trunk | ||
3 | Remove covers on tie-down eyes (4), unscrew bolts (3) and remove tie-down eyes (4) | ||
4 | Remove expansion rivets (7) | Installation: Replace damaged expansion rivets (7). | |
5 | Remove right paneling (5) | Installation: Ensure that edge guard is seated correctly. | |
6 | Loosen left paneling (6) until electrical connector on left trunk lamp (E18/5) is accessible | ||
7 | Release electrical connector on left trunk lamp (E18/5) and disconnect | ||
8 | Remove left paneling (6) | Installation: Ensure that edge guard is seated correctly. | |
9 | Install in the reverse order |