ar6830p4800mev
Remove/install side paneling in trunk
Typ ar · téma 68.30 · verze 0102 · 2013-10-07
Platí pro: MODEL 451.390/392/490/492 with ENGINE 780.993 MODEL 451.391/491 with ENGINE 780.009
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 3 Nástavba › 68 Vnitřní výbava › 68.30 Obložení, ozdobný rámeček — Řada 451 (modely 390, 391, 392, 490, 491, 492)
EinPAS 37 Vnitřní výbava › 37.45 Obložení › 37.45.34 Obložení zavazadlového prostoru — Řada 451 (modely 390, 391, 392, 490, 491, 492)
Platí také pro motory/převodovky: 780 009, 780 993
AR68.30-P-4800MEV
| Remove/install side paneling in trunk
| 26.09.2013
|
MODEL
| 451.390/392/490/492 with ENGINE 780.993
|
MODEL
| 451.391/491 with ENGINE 780.009
|
Shown on right side on model 451.3
|
1
| Trunk paneling
|
| 3
| Cover
|
| 5
| Insulation mat
|
2
| Cap
|
| 4
| Screw
|
| 6
| Clip
|
| Remove/install
|
|
|
1
| Adjust left and right seat toward front
|
|
|
2
| Unclip cover (3) on left trunk paneling (1) and remove
| When removing left trunk paneling (1).
|
|
3
| Unclip cap (2) below right trunk paneling (1) and remove
| When removing right trunk paneling (1).
|
|
4
| Unscrew bolt (4) from trunk paneling (1)
|
|
|
5
| Unclip trunk paneling (1) and remove
| Check clips (6) on trunk paneling (1), replace if necessary.
|
|
|
|
| Installation: Position edge guard on lower rear-end door in area of trunk paneling (1) with suitable tool.
|
|
6
| Remove insulating mat (5)
| When replacing trunk paneling (1).
|
|
7
| Install in the reverse order
|
|
|
