P68.30-3297-07
Shown on left side on model 451.3
1 Cover
2 Trunk paneling
4 Clips
3 Screw
| Remove/install | ||
1 | Adjust left and right seat toward front | ||
2.1 | Unclip cap below right trunk paneling (2) and remove | When removing right trunk paneling (2). | |
2.2 | Unclip cover (1) on left trunk paneling (2) and remove | When removing left trunk paneling (2). | |
3 | Unscrew bolt (3) from trunk paneling (2) | On right trunk paneling (2), bolt (3) is located behind cap at bottom. | |
4 | Unclip trunk paneling (2) and remove | With code (C17) smart surround sound system, disconnect electrical connector on left rear and right rear speaker. | |
Installation: Check clips (4) on trunk paneling (2), replace if necessary. Position edge guard on lower rear-end door in area of trunk paneling (2) with suitable tool. | |||
5 | Install in the reverse order |