P68.30-2338-09
1 Stowage compartment cover
2 Side upholstery of rear seat backrest
3 Luggage eyes
6 Side paneling
X58/4 Load compartment socket
4 Stop screw
5 Screws
| Removing, installing | ||
| Protect removed parts against contamination | ||
1 | Remove floor covering in load compartment | Installation: Move luggage eyes (3) through load compartment floor covering. | |
2 | Release rear seat backrest and fold forward | ||
3 | Open stowage compartment cover (1) and remove. | Observe direction of arrow. | |
4 | Remove side upholstery (2) from rear seat backrest | ||
5 | Unscrew stop screw (4) from side paneling (6) | Installation: Observe installation position of stop screw (4). Double cover should be positioned on stop screw (4) without tension to release rear seat backrest from load. | |
6 | Unscrew screws (5) from side paneling (6) | ||
7 | Disconnect load compartment socket (X58/4) | ||
8 | Remove side paneling (6) | ||
9 | Install in the reverse order |