AR68.30-P-4700GV | Remove/install paneling on B-pillar | 27.2.12 |
MODEL 461.239 /321 /322 /336 /338
MODEL 461.332 /333 /334
except CODE (ZS4) Special protection version FB4
except CODE (ZS6) Special protection version FB6
except CODE (ZS7) Special protection version FB7
P68.30-2185-06
1 Belt end fitting screw cover
2 Belt end fitting screw/bolt
3 Pin
4 Expansion rivet
5 B-pillar paneling
6 Clamp
7 Insert bead
8 Power window switch connector
| Remove/install | ||
1 | Remove bolt cap from belt end fitting (1). | ||
2 | Remove bolts from belt end fitting (2) | | |
Loctite 243 | |||
3 | Remove pins (3) and expansion rivets (4) from B-pillar paneling (5). | ||
4 | Remove B-pillar paneling (5) from B-pillar at top. | Do not damage B-pillar paneling (5) at top or bottom, danger of breakage. | |
Installation: Check clamps (6), replace if necessary. Ensure that the B-pillar paneling (5) is seated correctly in the insert bead (7) at top. | |||
5 | Separate power window switch connector (8) | Only on vehicles with code (V51) 4 power windows | |
6 | Remove B-pillar trim (5) | ||
7 | Install in the reverse order |
Seat belts/emergency tensioning retractors
Repair materials
Number | Designation | Order number |
BR00.45-Z-1133-02A | Loctite 243 | A 613 989 09 71 |