AR68.30-P-4700GLS | Remove/install paneling on B-pillar | 27.2.12 |
MODEL 461
with protection kit
MODEL 461
with CODE (ZS4) Special protection version FB4
with CODE (ZS6) Special protection version FB6
with CODE (ZS7) Special protection version FB7
P91.40-2565-01
1 Seat belt guide bracket
P68.30-3064-06
Illustrated on model 461.331
2 Grab handle
3 Screw
4 Seat belt height adjustment mechanism
5 Screw
6 Screw
9 Front roof frame panel
10 Rear roof frame panel
P91.40-2567-01
7 Belt end fitting
8 Screw
| Remove/install | ||
1 | Remove support rod (2) | ||
2 | Remove front roof frame panel (9). | For this purpose, remove caps from front roof frame panel (9) and unscrew exposed bolts. | |
3 | Remove rear roof frame panel (10). | For this purpose, remove caps from rear roof frame panel (10) and unscrew exposed bolts. | |
4 | Remove bolt (8) from belt end fitting (7) | Installation: Secure bolt (8) with quick-acting adhesive. | |
| |||
Loctite 243 | |||
5 | Remove cover from seat belt guide bracket (1) upward. | ||
6 | Unscrew nut from seat belt guide bracket (1) and remove seat belt from B-pillar | Installation: Ensure that the belt is not twisted. Secure nut on belt guide bracket (1) with quick-acting adhesive. | |
| |||
Loctite 243 | |||
7 | Remove cover behind seat belt guide bracket (1) | Start by removing bolts (6). | |
8 | Remove seat belt height adjustment (4) | For this purpose, unscrew upper and lower bolt from seat belt height adjustment (4). | |
9 | Remove bolt (5) | Installation: If present, use new microencapsulated splinter protection bolts (5). If required, secure bolts (5) with quick-acting adhesive. | |
| |||
Loctite 243 | |||
10 | Remove bolt (3) | Installation: If present, use new microencapsulated splinter protection bolts (3). If required, secure bolts (3) with quick-acting adhesive. | |
| |||
Loctite 243 | |||
11 | Remove B-pillar lining | When removing B-pillar paneling, guide seat belt through opening at bottom of B-pillar. Pull out B-pillar paneling downward in direction of arrow to remove. | |
Installation: Ensure that the belt is not twisted. | |||
12 | Install in the reverse order |
Trims, ornamental frames
Number | Designation | Model | Model | |
BA68.30-P-1012-01B | Bolt, reinforcement to B-pillar | Nm | 15 | 15 |
BA68.30-P-1013-01B | Bolt, B-pillar reinforcement to vehicle floor | Nm | 15 | 15 |
Seat belts/emergency tensioning retractors
Number | Designation | Model 461 | |
BA91.40-P-1001-01C | Screw on belt end fitting | Nm | 35 |
BA91.40-P-1002-01C | Screw/nut on front seat belt guide bracket | Nm | 35 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1133-02A | Loctite 243 | A 613 989 09 71 |