P68.30-2318-06
1 Belt end fitting screw
2 Console for luggage compartment lid
3 Edge guard
4 C-pillar paneling
5 Roof paneling
6 Seat belt
| Removing, installing | ||
1 | Release rear seat cushion and fold forwards | ||
2 | Unscrew screw (1) at belt end fitting | Belt end fitting screw | |
3 | Remove console for luggage compartment lid (2) | ||
4 | Remove edge guard (4) in area of C-pillar paneling (3) | ||
5 | Unclip C-pillar (4) at bottom to center of vehicle and pull out of headliner (5) downward | Installation: Do not damage headliner material (5). | |
6 | Move seat belt (6) through C-pillar paneling (4) | ||
7 | Remove C-pillar paneling (3) | Installation: Observe installation position of seat belt (6) | |
8 | Install in the reverse order |
Seat belts/emergency tensioning retractors