ar6830p4490gqs

Remove/install trim at C-pillar

Typ ar · téma 68.30 · verze 0100 · 2014-10-24

Platí pro: MODEL 166 (except 166.8) with CODE Z05 (B5 armoring on special protection version)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 68 Vnitřní výbava › 68.30 Obložení, ozdobný rámeček — Řada 166 (modely 0**)

EinPAS 37 Vnitřní výbava › 37.45 Obložení › 37.45.30 Obložení vnitřního prostoru vozidla/prostoru pro cestující — Řada 166 (modely 0**)

AR68.30-P-4490GQS

Remove/install trim at C-pillar

15.10.14

MODEL

166 (except 166.8)

with CODE Z05 (B5 armoring on special protection version)

Remove/install trim at C-pillar

1

Trunk lining

2

Interior paneling

3

Edge guard

4

Retaining clamp

5

Guide lugs

P68.30-3799-06

Remove/install

1

Remove edge guard (3) on interior paneling (2) from C-pillar

2

Unscrew bolt from belt end fitting at bottom

Bolt, belt end fitting/seat belt lock, rear seat on body/seat

*BA91.40-P-1007-01R

3

Unclip interior paneling (2) from C-pillar on side wall

Installation: Make sure that retaining clip (4) is seated properly. Guide interior paneling (2) into headliner free of tension.

Installation: Do not twist seat belt.

Mounting wedge

*110589035900

4

Remove side paneling in trunk

AR68.30-P-4800GQ

5

Unclip trunk paneling (1) from C-pillar on side wall

Installation: Install guide lugs (5) into C-pillar paneling free of tension.

Mounting wedge

*110589035900

6

Install in the reverse sequence

Seat belts/emergency tensioning retractors

Number

Designation

MODEL 166

BA91.40-P-1007-01R

Bolt, belt end fitting/seat belt lock, rear seat on body/seat

Nm

35

Remove/install trim at C-pillar

110 589 03 59 00

Mounting wedge

Odkazované dokumenty