ar6830p4490gq

Remove/install trim at C-pillar

Typ ar · téma 68.30 · verze 0102 · 2014-09-16

Platí pro: MODEL 166 (except 166.8) without CODE Z05 (B5 armoring on special protection version)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 68 Vnitřní výbava › 68.30 Obložení, ozdobný rámeček — Řada 166 (modely 0**)

EinPAS 37 Vnitřní výbava › 37.45 Obložení › 37.45.30 Obložení vnitřního prostoru vozidla/prostoru pro cestující — Řada 166 (modely 0**)

AR68.30-P-4490GQ

Remove/install trim at C-pillar

22.8.14

MODEL

166 (except 166.8)

without CODE Z05 (B5 armoring on special protection version)

Remove/install trim at C-pillar

1a

Guide lugs

1

Cover

2

Headliner

3

Retaining clamp

4

Screw

5

Edge guard

P68.30-3579-06

Remove/install

1

Remove side paneling in trunk

AR68.30-P-4800GQ

2

Remove edge guard (5) on paneling (1) from C-pillar

3

Remove bolt (4) from belt end fitting at bottom

Bolt, belt end fitting/seat belt lock, rear seat on body/seat

*BA91.40-P-1007-01R

4

Unclip paneling (1) on C-pillar from side wall

Installation: Make sure that retaining clip (3) is seated properly.

Mounting wedge

*110589035900

5

Remove paneling (1) on C-pillar from headliner (2) and remove paneling from D-pillar

Installation: Install guide lugs (1a) in headliner (2) and in D-pillar paneling free of tension.

6

Remove paneling (1) from C-pillar

Installation: Do not twist seat belt.

7

Install in the reverse order

Seat belts/emergency tensioning retractors

Number

Designation

MODEL 166

BA91.40-P-1007-01R

Bolt, belt end fitting/seat belt lock, rear seat on body/seat

Nm

35

Remove/install trim at C-pillar

110 589 03 59 00

Mounting wedge

Odkazované dokumenty