ar6830p430510p

Install IRS wiring harness in headliner

Typ ar · téma 68.30 · verze 0101 · 2010-03-29

Platí pro: MODEL 203.0 /2 with CODE (882b) Interior motion sensor (only with anti-theft alarm system) MODEL 203.7 with CODE (882b) Interior motion sensor (only with anti-theft alarm system) except CODE (413) Panorama sliding roof

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 68 Vnitřní výbava › 68.30 Obložení, ozdobný rámeček — Řada 203 (modely 0**, 2**, 7**)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.25 Hlavní kabelový svazek › 25.25.27 Kabelový svazek střechy — Řada 203 (modely 0**, 2**, 7**)

AR68.30-P-4305-10P

Install IRS wiring harness in headliner

Repair materials

Number

Designation

Order number

BR00.45-Z-1071-02A

Adhesive tape roll, gray Tesa tape, 50 meters 0.3X50, 236 mm

A 001 989 17 85

Install IRS wiring harness in headliner

P68.30-2640-11

Illustrated on model 203.0 with code (543) sun visors with illuminated mirrors

1 Headliner

2 IRS wiring harness

3 Main wiring harness

A26/14 Interior motion sensor transmitter and receiver

1 Connect new IRS wiring harness (2) to interior protection system transmitter/receiver (A26/14) and arrest interior protection system transmitter/receiver (A26/14) in installation frame.

2 Route new IRS wiring harness (2) on new headliner (1) and glue to new headliner (1) with approx. 10 cm long strip of adhesive tape crossways at an interval of approx. 10 cm.

Do not cross main wiring harness (3) with new IRS wiring harness (2) and press strips of adhesive tape on sufficiently, otherwise a short circuit can result from chafing on the roof paneling.

The old headliner (1) serves as a guide for routing the wiring harness.