ar6830p430505t

Install vanity mirror illumination wiring harness in headliner

Typ ar · téma 68.30 · verze 0102 · 2010-03-29

Platí pro: MODEL 211.0 with CODE (413) Panorama sliding roof with CODE (543) Sun visors with illuminated mirror MODEL 211.2 with CODE (543) Sun visors with illuminated mirror

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 68 Vnitřní výbava › 68.30 Obložení, ozdobný rámeček — Řada 211 (modely 0**, 2**)

EinPAS 30 Osvětlovací soustava › 30.20 Vnitřní osvětlení › 30.20.12 Snímač/spínač/kabelový svazek — Řada 211 (modely 0**, 2**)

AR68.30-P-4305-05T

Install vanity mirror illumination wiring harness in headliner

Repair materials

Number

Designation

Order number

BR00.45-Z-1071-02A

Adhesive tape roll, gray Tesa tape, 50 meters 0.3X50, 236 mm

A 001 989 17 85

Install vanity mirror illumination wiring harness in headliner

P68.30-2696-11

Shown on right front vanity mirror illumination (E14/7)

1 Clip left front vanity mirror illumination (E14/6) and right front vanity mirror illumination (E14/7) into left and right installation frame (2).

2 Connect vanity mirror illumination wiring harness (1) to left front vanity mirror illumination (E14/6) and right front vanity mirror illumination (E14/7).

3 Clip left and right sun visor pivot bearing (3) into headliner (4).

Install vanity mirror illumination wiring harness in headliner

P68.30-2695-11

4 Route vanity mirror illumination wiring harness (1) without kinks except at predetermined kink points (arrows) and glue to headliner (4) with adhesive tape (5).

Firmly press on adhesive tape (5), otherwise the adhesive tape (5) can detach itself from the headliner (4).

The routing angle at the intended bending point (arrows) should be 90°.