ar6830p1080pb

Remove, install inner paneling on rear-end door window

Typ ar · téma 68.30 · verze 0101 · 2008-03-27

Platí pro: MODEL 203.7

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 68 Vnitřní výbava › 68.30 Obložení, ozdobný rámeček — Řada 203 (modely 7**)

EinPAS 37 Vnitřní výbava › 37.45 Obložení › 37.45.30 Obložení vnitřního prostoru vozidla/prostoru pro cestující — Řada 203 (modely 7**)

AR68.30-P-1080PB

Remove, install inner paneling on rear-end door window

11.3.08

MODEL 203.7

Remove, install inner paneling on rear-end door window
Remove, install inner paneling on rear-end door window

P68.30-2278-01

Shown on model 203.7## #A

1 Ball head

2 Side paneling

3 Retaining clips

P68.30-2279-01

Remove, install inner paneling on rear-end door window
Remove, install inner paneling on rear-end door window

P68.30-2305-01

Shown on model 203.7## #A

2 Side paneling

4 Upper trim panel

5 Upper retaining clamps

P68.30-2306-01

Remove/install

1

Unclip upper paneling (4) and remove

Unclip carefully, otherwise the retaining tab can break off on the inside of the upper paneling (4).

2

Unclip both restraint cables on trunk luggage cover from ball heads (1).

3

Unscrew ball heads (1)

On vehicles with ball heads (1) screwed on.

Ball heads (1) which are screwed on can be replaced later by ball heads (1) which clip into the side paneling (2) later.
It is not necessary to remove clipped in ball heads (1).

4

Loosen side paneling (2) from retaining clamps (3) and remove

5

Install in the reverse order