ar6820p2050f

Removing and installing front floor covering (on left)

Typ ar · téma 68.20 · verze 0100 · 1997-04-24

Platí pro: MODEL 210

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 68 Vnitřní výbava › 68.20 Středová konzola — Řada 210

EinPAS 37 Vnitřní výbava › 37.46 Podlaha › 37.46.31 Podlahová krytina vnitřního prostoru vozidla — Řada 210

AR68.20-P-2050F

Removing and installing front floor covering (on left)

3.3.95

MODEL 210

Removing and installing front floor covering (on left)

P68.20-0253-05

1 Edge guard

2 Cover

3 Cover

4 Screw

5 Paneling

6 Clip

7 Clip

8 Nut

9 Accelerator pedal

10 Floor covering

Arrows Area of center console

Removal, installation

1

Cover below instrument panel removed (left)

AR68.10-P-1500F

2

Pull off cover (2) on longitudinal member upward (3 clips)

3

Pull edge guard (1) off in lower area of
A-pillar

4

Remove cover (3) and unscrew screw (4)

5

Remove paneling (5) toward rear; for this purpose unclip clips (6, 2 each) on A-pillar

6

Unscrew nuts (8, 2 each) on accelerator pedal (9) and remove accelerator pedal from threaded stud

7

Move driver's seat all the way down

8

Lift floor covering (10) at rear, pull out along center console and then remove floor covering toward rear

Installation:
When installing insert floor covering (10) in area of center console (arrows)

9

Reinstall in opposite order

Odkazované dokumenty