P67.30-2059-01
1 Cover
2 Bottom molding
3 Top molding
4 Mounting clips
5 Mounting clips
P67.30-2060-01
| Removing | ||
1 | Open rear door | ||
2 | Remove cover (1) | ||
3 | Unclip bottom molding (2) | Assembly wedge | |
4 | Remove bottom molding (2) | ||
5 | Unclip top molding (3) | Assembly wedge | |
Start at front at the first three mounting clips (5) | |||
6 | Move top molding (3) toward front | This loosens the top molding (3) from the last mounting clip. | |
7 | Remove top molding (3) | ||
| Installing | ||
8 | Check mounting clips (4) and (5) | Replace damaged mounting clips (4) and (5). | |
9 | Align top molding (3) at mounting clips (5) and press on | Use lubricant | |
10 | Align bottom molding (2) at mounting clips (4) and press on | ||
11 | Check molding (3) and (4) position, correct if necessary. | ||
12 | Install cover (1) | ||
13 | Close rear door |
Assembly wedge
110 589 03 59 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1010-06A | Lubricant, rubber assembly 1 l | A 000 989 03 67 |