Align windshield in body opening

AR67.10-P-1000-04T

Align windshield in body opening

Model

211

except code Z04 (Light armoring)

Check values for windshield

Number

Designation

MODEL 211 with CODE 413 with CODE 419

BE67.10-P-1002-01C

Distance between top edge of window and base center point of clip attaching trim strip at top

mm

4,5

Shown with code 413 (Panoramic sliding roof)

1

Windshield

2

Mounting clamps (with code 413 (Panoramic sliding roof))

a

Distance dimension (with code 413 (Panoramic sliding roof))

1

Lay windshield (1) down on window rubber spacers.

2

Center windshield (1) in body opening.

3.1

Model 211
with code 413 (Automatic panoramic sliding sunroof)
except code Z04 (Light armoring)
Model 211
with code 419 (Solar module for interior ventilation)
except code Z04 (Light armoring)
Adjust distance dimension (a) between top edge of window and bottom center point on mounting clips (2) and fix windshield (1) in place with adhesive strips.

  Use feeler gauge.

3.2

Model 211
except code 413 (Automatic panoramic sliding sunroof)
except code 419 (Solar module for interior ventilation)
except code Z04 (Light armoring)
Completely move windshield (1) to front edge of roof with rubber lip and fix in place with adhesive strips.

 The distance between the top of the window and the front edge of the roof is dictated by the rubber lip profile.

4

Glue on strips of adhesive tape (arrows).

5

Cut through adhesive strips (arrows) at edge of windshield (1).

6

Remove windshield (1) from vehicle.