When reusing removed roof paneling (1). Cut off remaining adhesive material on roof paneling (1) down to maximum height of 2 mm using a scraper and remove loose remaining adhesive.
Cut back remaining glue on roof paneling (1) max. 15 minutes before applying the new adhesive bead. The adhesive on the cut surface reacts with the ambient air leading to lack of adhesion.
2.2
When installing new roof paneling (1). Clean adhesive area on roof paneling (1) with heptane cleaner 3350 (7).
The gluing area on the roof paneling (1) must be absolutely free of dust and grease. Dirt can lead to paint adhesion problems of adhesive material.
Use cloth (9) to apply heptane cleaner 3350 (7).
2.3
When reusing removed roof paneling (1). Repair damaged primer coat on roof paneling (1) with plastic primer (5).
Allow plastic primer (5) to flash off for min. 10 to 15 minutes. Use wool cloth to coat (13).
2.4
When installing new roof paneling (1). Coat adhesive area on roof paneling (1) with plastic primer (5).
Allow plastic primer (5) to flash off for min. 10 to 15 minutes.
3.1
When reusing removed roof paneling (1). Replace damaged spacers (10) with new spacers (10).
Remove upper adhesive foil on new spacers (10) only after fitting roof paneling (1).
3.2
When installing new roof paneling (1). Glue on spacers (10) in crosshatched areas.
Remove upper adhesive foil on new spacers (10) only after fitting roof paneling (1).
