P65.10-3248-06
Mask off upper edge of windshield as well as attachment and body parts in cutting area with masking tape to prevent damage by cutting wire.
Aid of helper required for cut out and removal of roof paneling.
1 Press hollow needle on top edge of roof through adhesive seam (arrow B) and guide cutting wire from outside to inside through hollow needle.
The recommended length of the cutting wire is 85 cm.
2 Cut out roof paneling with cutting wire.
With code (E22) Glass roof (FFO):
If the roof paneling is to be reinstalled, ensure that the sprues (arrows A) and the sealing paint on the roof paneling are not damaged, because if damaged, it will be necessary to replace the roof paneling.
3 Remove roof paneling.