ar6350d622002a
Preparing outer wheel flange for installation
Typ ar · téma 63.50 · verze 0109 · 2006-10-31
Platí pro: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66 MODEL 690.63 /64
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 3 Nástavba › 63 Boční stěna › 63.50 Zadní blatník — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 06*, 36*, 46*, 66*)
EinPAS 35 Karoserie/rám/montované díly › 35.34 Boční stěna › 35.34.41 Nosič/montáž kol — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 06*, 36*, 46*, 66*)
AR63.50-D-6220-02A
| Preparing outer wheel flange for installation
|
|
|
WE58.40-Z-1003-03A
| Angle grinder (electric/pneumatic)
|
Number
| Designation
| Order number
|
BR00.45-Z-1001-07A
| Zinc dust paint suitable for spot welding
| A 000 986 34 42
|
1 Punch 6 mm dia. holes in areas (5 and 6) at a maximum hole interval of 15 mm (arrows).
2 Uniformly punch
3 holes with 6 mm dia. bit in area (7) (arrows).
3 Grind outer wheel flange (1) down to bare metal in marked area (4) and coat with zinc dust paint.
4 Grind outer wheel flange (1) down to bare metal on both sides in marked areas (5, 6, 7 and 8) and coat with zinc dust paint.
5 Punch 2 holes with 6 mm dia. bit on left and right at a maximum hole interval of 15 mm in area (9) (arrows).
6 Grind outer wheel flange (1) down to bare metal on both sides in marked areas (9 and 10) and coat with zinc dust paint.
