Řady
cs
ar6330d000502a
Prepare rear right door outer sill for installation
Typ ar · téma 63.30 · verze 0109 · 2006-10-31
Platí pro: MODEL 901.32 /42 /62, 902.32 /42 /62, 903.02 /32 /42 /62, 904.32 /42 /62, 905.62 MODEL XD2, XD3, XD4, XD5, XD6, XD7 MODEL 903.62, 904.62 with CODE (ZU9) National version for Mexico
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 3 Nástavba › 63 Boční stěna › 63.30 Vnější podélník — Řada 901 (modely 32*, 42*, 62*) · Řada 902 (modely 32*, 42*, 62*) · Řada 903 (modely 02*, 32*, 42*, 62*) · Řada 904 (modely 32*, 42*, 62*) · Řada 905 (modely 62*)
EinPAS 35 Karoserie/rám/montované díly › 35.20 Kabina řidiče/karoserie › 35.20.50 Nástup — Řada 901 (modely 32*, 42*, 62*) · Řada 902 (modely 32*, 42*, 62*) · Řada 903 (modely 02*, 32*, 42*, 62*) · Řada 904 (modely 32*, 42*, 62*) · Řada 905 (modely 62*)
AR63.30-D-0005-02A
Prepare rear right door outer sill for installation
WE58.40-Z-1001-03A
Drill (electric/pneumatic)
WE58.40-Z-1003-03A
Angle grinder (electric/pneumatic)
Number
Designation
Order number
BR00.45-Z-1001-07A
Zinc dust paint suitable for spot welding
A 000 986 34 42
1 Draw drilling points at rear of rear right door outer sill (1) with the following dimensions:
a = 40 mm,
b = 22 mm,
c = 10 mm.
2 Draw drilling points at the front sill (1) with the following dimensions:
a = 35 mm,
b = 22 mm,
c = 10 mm.
3 Drill all marked holes with diameter of 6 mm dia. bit.
4 Sand sill (1) down to the bare metal on both sides in the area of the drill holes, and coat with zinc dust paint.
5 Sand sill (1) down to bare metal on both sides in the marked area (2) and coat with zinc dust paint.
6 Fit sill (1), align and clamp in position.
