Welding in right side wall paneling bottom section
Typ ar · téma 63.10 · verze 0108 · 2006-07-26
Platí pro: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.062 /362 /462 /662 with CODE (T16) Right cargo area sliding door with CODE (T19) Left cargo area sliding door MODEL 690.63 /64 with CODE (T16) Right cargo area sliding door
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Welding in right side wall paneling bottom section
Commercially available tools
Number
Designation
WH58.30-Z-1001-40A
Tarp (fire-resistant)
Workshop equipment
WE58.40-Z-1001-02A
Inert gas welder
WE58.40-Z-1002-02A
Spot welder
WE58.40-Z-1003-02A
Multifunction device
D63.10-0045-05
1 Weld right side wall paneling bottom section (1) to sheet metal strip , arrows).
2 Weld right side wall paneling bottom section (1) to C-pillar (12) , arrows).
3 Weld right side wall paneling bottom section (1) to outer sliding door entry (4) ( , 13).
D63.10-0023-11
4 Weld right side wall paneling bottom section (1) to side wall paneling upper section (19) and outer corner pillar paneling (5) ( , arrows).
D63.10-0038-11
To prevent sheet metal strips from distorting hold steel or copper block against side wall paneling from outside . Ensure that block (approx. 25 mm x 25 mm x 200 mm) makes contact over entire surface.
5 Weld right side wall paneling bottom section (1) to side wall inner section (10) ( or , arrows).
D63.10-0014-01
6 Weld right side wall paneling bottom section (1) to longitudinal member and wheelhouse ( , arrows).
D63.10-0015-01
7 Weld right side wall paneling bottom section (1) to rear longitudinal member and wheelhouse ( , arrows).
