ar6310d591302b
Preparing connection points for right side wall paneling bottom section
Typ ar · téma 63.10 · verze 0111 · 2006-10-31
Platí pro: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66 MODEL 690.63 /64
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 3 Nástavba › 63 Boční stěna › 63.10 Boční stěna — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 06*, 36*, 46*, 66*)
EinPAS 35 Karoserie/rám/montované díly › 35.34 Boční stěna › 35.34.35 Blatník/boční stěna — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 06*, 36*, 46*, 66*)
EinPAS 35 Karoserie/rám/montované díly › 35.34 Boční stěna › 35.34.39 Opláštění vpravo — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 06*, 36*, 46*, 66*)
AR63.10-D-5913-02B
| Preparing connection points for right side wall paneling bottom section
|
|
|
Commercially available tools
Number
| Designation
|
|
WH58.30-Z-1001-40A
| Tarp (fire-resistant)
|
|
WE58.40-Z-1002-02A
| Spot welder
|
WE58.40-Z-1001-03A
| Drill (electric/pneumatic)
|
WE58.40-Z-1003-03A
| Angle grinder (electric/pneumatic)
|
WE58.40-Z-1004-03A
| Body saw (electric/pneumatic)
|
Number
| Designation
| Order number
|
BR00.45-Z-1001-07A
| Zinc dust paint suitable for spot welding
| A 000 986 34 42
|
1 Grind remaining sheet metal (8) back to edge of outer corner pillar paneling (5).
2 Grind remaining sheet metal (15) back to edge of front paneling (14).
Perform the following step only when installing side wall paneling at points marked here with plugs welds (1) ( )
3 Punch 6 mm dia. holes in inner section of side wall paneling (10) and at a maximum hole interval of 95 mm (arrows).
4 Align character ridge (17), grind and coat with zinc dust paint.
5 Measure distance a between C-pillar (12) and end of character ridge (17).
6 Cut sheet metal strip (18) to size with the following dimensions:
b = a - 80 mm,
c = approx. 40 mm,
d = approx. 1.5 mm.
7 Grind off sheet metal strips (18) on both sides and coat with zinc dust paint.
8 Spot weld sheet metal strips (18) at character ridge (17)
(, arrows).
