Weld in right side wall paneling up to window cutout
Typ ar · téma 63.10 · verze 0108 · 2006-07-26
Platí pro: MODEL 901.37 /67, 902.07 /37 /47 /67, 903.07 /37 /47 /67 MODEL 901.06 /36 /46 /66, 902.06 /36 /46 /66, 903.06 /36 /46 /66, 904.062 /362 /462 /662 mit Fenster in Seitenwand MODEL 690.63 mit Fenster in Seitenwand MODEL 690.64
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Weld in right side wall paneling up to window cutout
Commercially available tools
Number
Designation
WH58.30-Z-1001-40A
Tarp (fire-resistant)
Workshop equipment
WE58.40-Z-1001-02A
Inert gas welder
WE58.40-Z-1002-02A
Spot welder
WE58.40-Z-1003-02A
Multifunction device
WE58.40-Z-1003-03A
Angle grinder (electric/pneumatic)
WE58.40-Z-1004-03A
Body saw (electric/pneumatic)
D63.10-0063-06
1 Weld right side wall paneling bottom section (1) to side wall paneling top section (19), outer corner pillar paneling (5) and front paneling (14) , arrows).
D63.10-1148-12
To prevent the sheet metal parts from distorting, hold steel or copper block to side wall paneling from outside. The block (approx. 25 mm x 25 mm x 200 mm) should make full contact.
2 Weld right side wall paneling to side wall inner section (10) or , arrows).
D63.10-0014-01
3 Weld right side wall paneling (1) on front inner side wall section ( , arrows).
D63.10-0015-01
4 Weld right side wall paneling (1) on rear inner side wall section ( , arrows).
D63.10-1149-12
5 Cut out window cutout of side wall along inner section of side wall (dotted line).
