ar6310d589203a

Preparing right side wall paneling up to window cutout for installation

Typ ar · téma 63.10 · verze 0113 · 2006-10-31

Platí pro: MODEL 901.37 /67, 902.07 /37 /47 /67, 903.07 /37 /47 /67 with CODE (T16) Right cargo area sliding door with CODE (T19) Left cargo area sliding door MODEL 901.06 /36 /46 /66, 902.06 /36 /46 /66, 903.06 /36 /46 /66, 904.062 /362 /462 /662 with CODE (T16) Right cargo area sliding door with CODE (T19) Left cargo area sliding door mit Fenster in Seitenwand MODEL 690.63 with CODE (T16) Right cargo area sliding door mit Fenster in Seitenwand MODEL 690.64 with CODE (T16) Right cargo area sliding door

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 63 Boční stěna › 63.10 Boční stěna — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 062, 362, 462, 662)

EinPAS 35 Karoserie/rám/montované díly › 35.34 Boční stěna › 35.34.35 Blatník/boční stěna — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 062, 362, 462, 662)

EinPAS 35 Karoserie/rám/montované díly › 35.34 Boční stěna › 35.34.39 Opláštění vpravo — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 062, 362, 462, 662)

AR63.10-D-5892-03A

Preparing right side wall paneling up to window cutout for installation

Workshop equipment

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1004-03A

Body saw (electric/pneumatic)

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Preparing right side wall paneling up to window cutout for installation

D63.10-1150-06

1 Separate front and rear side wall paneling (2) above bottom window frame with the following dimension (dotted line, 16):

a = approx. 50 mm.

Preparing right side wall paneling up to window cutout for installation

D63.10-0057-05

2 Punch uniform 6 mm dia. holes in right side wall paneling (1) and at a maximum hole interval of 50 mm (arrows).

3 Separate right side wall paneling (1) along bottom edge (dotted line, 11).

Preparing right side wall paneling up to window cutout for installation

D63.10-0058-05

4 Separate right side wall paneling (1) along rear edge with the following dimension (dotted line):

b = approx. 1 mm.

5 Grind right side wall paneling (1) on both sides in marked area and coat with zinc dust paint.

6 Hold right side wall paneling (1), align and clamp.