Preparing left side wall paneling up to character bead for installation

Workshop equipment

D63.10-0069-06

1 Mark separating line (9) in character bead (8) of left side wall paneling (2) with the following dimension:

b = approx. 35 mm.

2 Separate left side wall paneling (2) at marked separating line (9).

3 Separate left side wall paneling up to character bead (1) along front edge with the following dimension
(dotted line, 10):

c = approx. 1 mm.

4 Punch 5 mm dia. holes over entire length of character bead (8) at a maximum hole interval of 15 mm
(area D).

D63.10-0070-01

5 Grind down left side wall paneling up to character bead (1) in marked area on both sides and coat with zinc dust paint.

6 Position left side wall paneling up to character bead (1), aligh and clamp.