201 589 00 51 00
Spot weld miller
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D62.30-1107-01
1 Grind off sheet metal remains (11) from towing lug (9).
2 Cut spot welds out of sheet metal remains (11) (arrows).
3 Remove sheet metal remains (11) from side rail (12).
Right longitudinal frame member
D62.30-1124-01
Left longitudinal frame member
D62.30-1108-01
4 In mount of towing lug (9) drill 3 holes, Ø 10 mm (arrows).
5 Grind off areas around the bores on both sides and coat with zinc dust paint.
Right longitudinal frame member
D62.30-1125-01
Left longitudinal frame member
D62.30-1127-10
6 Hold reinforcing bracket in installation position against side rail (12) and copy contours over to side rail (12).
7 Grind off side rail (12) in marked area and coat with zinc dust paint.
A Side rail inner side
B Side rail outer side