201 589 00 51 00
Spot weld cutter
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D62.30-1113-09
1 Expose spot welds of reinforcing bracket (13) on side rail (12) and mill (arrows).
D62.30-0002-09
2 Cut spot welds out of end tips (4), wheel arch flarings (6), inside sections of A-pillar (5) and front frame crossmember (1) (arrows).
D62.30-0003-06
3 Detach a window out of front frame crossmember (1) in front of left longitudinal member (broken line, 7).
4 Cut spot welds out of front frame crossmember (1) (arrows).
5 Detach front frame crossmember (1) around right longitudinal member (broken line, 8).