Remove/install front end paneling

AR62.10-D-5750C

12.3.10

MODEL 901.6, 902.6, 903.6, 904.6

MODEL 690.6

D62.10-1101-06

1 Cross-head screw

2 Front end paneling

3 Cross-head screw

4 Cross-head screw

5 Additional turn signal lamp

6 Expansion rivet

7 Bracket

8 Cross-head screw

9 Hexagon bolt

10 Internal Torx drive bolt

 	Remove/install
1	Remove front bumper		AR88.20-D-2000C
2	Remove front grille		AR88.00-D-2115B
3	Remove lock crossmember		AR88.00-D-2302A
4	Remove lamp unit		AR82.10-D-4730A
5	Unclip additional turn signal lamp (5) (arrow). Disconnect connector and remove
6	Pull out expansion rivet (6) and remove bumper support bracket (7)
7	Remove sealant between area (A) of wheelhouse and front end paneling	 Installation: Replace seal.
		Sealant	*BR00.45-Z-1003-01A
8	Unscrew bolts (3) from A-pillar
9	Unscrew bolts (4) from wheelhouse
10	Unscrew bolts (8, 9, 10)
11	Remove front end paneling (2)	 Remove sealant residues
12	Install in the reverse order	 Before installing inner front end paneling, coat with underbody protection agent Observe uniform gap to engine hood.

Repair materials

Number	Designation	Order number
BR00.45-Z-1003-01A	Sealant, white, 310 ml, DB supply specification 6069.20	A 001 989 63 20