ar6110d610201a
Separating end cross member
Typ ar · téma 61.10 · verze 0105 · 2006-07-25
Platí pro: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66 MODEL 690.63 /64
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 3 Nástavba › 61 Spodní část vozidla › 61.10 Rámová podlaha — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 06*, 36*, 46*, 66*)
EinPAS 35 Karoserie/rám/montované díly › 35.31 Zadní stěna/záď vozidla › 35.31.30 Zadní stěna/záď vozidla — Řada 690 (modely 63*, 64*) · Řada 901 (modely 06*, 36*, 37*, 46*, 66*, 67*) · Řada 902 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 903 (modely 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Řada 904 (modely 06*, 36*, 46*, 66*)
AR61.10-D-6102-01A
| Separating end cross member
|
|
|
WE58.40-Z-1001-03A
| Drill (electric/pneumatic)
|
WE58.40-Z-1003-03A
| Angle grinder (electric/pneumatic)
|
WE58.40-Z-1004-03A
| Body saw (electric/pneumatic)
|
WE58.40-Z-1005-03A
| Wet/dry vacuum cleaner
|
1 Cut spot welds out of floor panel (2) and inner corner pillar paneling (6) (arrows).
The following steps apply for the right side of the vehicle and must be performed on the left side with locations reversed.
2 Cut 8 spot welds out of end cross member (1) behind longitudinal member (arrows).
3 Separate end cross member (1) around longitudinal member mount (dotted line).
4 Separate end cross member (1) along outer longitudinal member (9) (dotted line).
