Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
D61.10-0096-06
1 Mark holes on end tip (1) as follows:
2 Mark auxiliary line at a distance of
a = 10 mm measured from outer edge (arrow).
3 Mark first hole+) at a distance of
b = 20 mm measured from outer edge (arrow).
4 Mark 13 additional holes (+) with a corresponding distance of c = 40 mm.
5 Mark auxiliary line at a distance of
d = 15 mm and auxiliary at a distance of e = 100 mm measured from outer edge (arrow).
6 Mark each first hole (+) at a distance of f=10 mm measured from the outer edge.
7 Mark remaining 6 holes (+) at a distance of g=45 mm each.
D61.10-0098-03
D61.10-0097-03
8 Mark auxiliary line at a distance of
h = 10 mm and i = 15 mm from outer edge.
9 Mark first hole+) at a distance of
j = 45 mm measured from already marked hole (arrow), also mark additional 10 holes (+) at a distance of j = 45 mm each.
10 Mark shaded area (8) with dimensions l=30 mm and m=25 mm, at a distance of k=210 mm measured from outer edge and cut out.
11 Separate shaded area (9) at edge (arrow).
12 Drill all marked holes (+) with
6 mm.
D61.10-0099-06
13 Grind end tip (1) down to bare metal on both sides in area of marked holes and coat with zinc dust paint.
14 Grind end tip (1) down to bare metal on both sides in marked areas and coat with zinc dust paint.