Tilt cab into repair position with hoisting crane, tilt back

AR60.80-G-0011UG

Tilt cab into repair position with hoisting crane, tilt back

17.12.15

Model

405.090/104/105/110/125/202/222 with body 405.840

except code F3W (Cab tilting mechanism, mechanical-hydraulic)

1

Support

4.2

Locking pin

7.1

Bearing sleeve

2

Pin

5.1

Pin

7.2

Bearing sleeve

3

Locking pin

5.2

Locking pin

Pfeil A

Hole

4.1

Pin

6

Eyelet

8

Release lever

10

Eyelet

9

Arresting lever

11

Hoisting cable

 Danger !

Risk of death caused by improper lifting of cab. Risk of injury caused by body parts being trapped and crushed when lowering cab

Only use approved lifting cradles. Ensure that the mounts are securely seated. Stay out from underneath a hanging cab.

AS60.80-Z-0002-01A

 Danger !

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A



Notes on tilting the cab

AH60.80-N-0003-01B

Tilt, lower

1

Turn front wheels to right

 To facilitate access to cab.

2

Remove loose objects from cab


Loose objects should not be present in the cab.
Otherwise the windshield can be damaged.

3.1

Open engine hood and raise to vertical position

Except code FS7 (Right front additional mirror (on mowing door))

3.2

Remove engine hood

With code FS7 (Right front additional mirror (on mowing door))

4

Install bushings (7.1, 7.2) on eye (6)

 Bushings (7.1, 7.2) are a component of the  support.

 Support

*405589004000

5

Push support (1) into pins (2) and secure locking pin (3)

 Support

*405589004000

6

Pull locking pin (4.2) out of bolts (4.1) and pull out pins (4.1)


Before lifting ensure that the pin (4.1) is pulled out of the upper hole of the support (1).
Otherwise the cab can be damaged.

7

Position support (1) above bushings (7.1, 7.2) and push in pin (5.1) from inside

8

Secure bolt (5.1) with locking pin (5.2)

9

Pull release lever (8) (arrow B) and secure with arresting lever (9) (arrow C)

 Tilting back:
Pull release lever (8) (arrow B), position large cutout of arresting lever (9) in relation to counterbearing of release lever (8) and release lever (8).

10

Install hoisting cable (11) with shackle on eyelet (10) on cab


Always use hoisting cable (11) and shackle with a lifting force of minimum 500 kg.
Otherwise the cab can be damaged.

11

Install hoisting cable (11) on hoisting crane

12

Lift cab with lifting crane until the lower hole (arrow A) coincide with the upper outer hole of the support (1)

13

Insert bolt (4.1) into upper outer hole and secure with locking pin (4.2)

14

Relieve hoisting cable (11) by lowering hoisting crane

15

Lower in reverse sequence