G60.80-3143-01
1 | Hydraulic pump | |||
2 | Selector lever | |||
3 | Safety strut | |||
G60.80-3344-01
Tilt cab | |||
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Topical note | Notes on tilting the cab | ||
1 | Raise front-end flap and secure | See Service Instructions | |
2 | Move selector lever (2) of hydraulic pump (1) to "Lift" position | | |
Move selector lever (2) to "Lower" position. | |||
3 | Install tool (SW 30) on hydraulic pump (1) and pump up cab | The vehicle lock is unlocked by the hydraulic pump (1). Pump up cab to end stop. | |
Actuate hydraulic pump (1) until cab is positioned forward to the front of the vehicle and a strong resistance is felt. | |||
4 | Install safety support (3) on piston rod | Observe installation position of safety strut, see adhesive label. | |
5 | Lower in reverse sequence | Ensure sufficient unobstructed movement of lines, hoses, etc. |
Odkazované dokumenty
- ah6080n000301b Pokyny ke sklápění kabiny řidiče
- as6080z000101a Nebezpečí úrazu v důsledku přivření a přiskřípnutí při sklápění kabiny řidiče