ar6080g0008ug

Tilt cab into repair position with cab tilting hydraulics, tilt back

Typ ar · téma 60.80 · verze 0100 · 2016-01-12

Platí pro: Model 405.090/104/105/110/125/202/222 with body 405.840 with code F3W (Cab tilting mechanism, mechanical-hydraulic)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 60 Nástavba všeobecně › 60.80 Kabina řidiče, uložení kabiny řidiče — Řada 405 (modely 090, 104, 105, 110, 125, 202, 222, 840)

EinPAS 35 Karoserie/rám/montované díly › 35.50 Uložení kabiny řidiče/sklápěcí zařízení kabiny řidiče/vzduchové odpružení kabiny řidiče › 35.50.40 Uložení kabiny/sklápěcí zařízení kabiny — Řada 405 (modely 090, 104, 105, 110, 125, 202, 222, 840)

AR60.80-G-0008UG

Tilt cab into repair position with cab tilting hydraulics, tilt back

17.12.15

Model

405.090/104/105/110/125/202/222 with body 405.840

with code F3W (Cab tilting mechanism, mechanical-hydraulic)

Tilt cab into repair position with cab tilting hydraulics, tilt back
Tilt cab into repair position with cab tilting hydraulics, tilt back

G60.80-3422-71

1

Hydraulic pump

2

Selector lever

3

Safety strut

G60.80-3423-71

Danger !

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

Notes on tilting the cab

AH60.80-N-0003-01B

Tilt, lower

1

Remove loose objects from cab


Loose objects should not be present in the cab.
Otherwise the windshield can be damaged.

2.1

Open engine hood and raise to vertical position

Except code FS7 (Right front additional mirror (on mowing door))

2.2

Remove engine hood

With code FS7 (Right front additional mirror (on mowing door))

3

Move selector lever (2) on hydraulic pump (1) to "Lift" position and lift cab with hydraulic pump (1) to end position


During raising, check whether all lines and components between cab and frame are free of tension, if necessary disconnect connections.
Otherwise damage could occur to the lines or components.

The vehicle lock is unlocked by the hydraulic pump (1).

Tilting back:
Move selector lever (2) to "Lower" position.
Actuate hydraulic pump (1) until cab is positioned forward to the front of the vehicle and a strong resistance is felt.
Move selector lever (2) to "Lift" position and relieve piston rod of tilting hydraulics by actuating hydraulic pump (1) several times. Move selector lever (2) to "Lower" position.

4

Install safety strut (3) on piston rod as shown

Safety strut (3) can be found in the vehicle tool kit.

5

Lower in reverse sequence

Odkazované dokumenty