Workshop equipment
WE58.40-Z-1002-01B | Modular longitudinal member (A1) 955.741 |
WE58.40-Z-1003-01B | Modular longitudinal member (B1) 955.742 |
WE58.40-Z-1004-01B | Modular auxiliary member (D) 955.704 |
WE58.40-Z-1005-01B | Module member (C) 955.703 or 955.715 |
WE58.40-Z-1006-01B | Countersunk bolts M16100 |
WE58.40-Z-1007-01B | Assembly strips |
WE58.40-Z-1001-01E | Celette straightening bench |
D60.10-0019-04
1 Celette straightening bench
2 Assembly strip
3 Countersunk screw
TO1 Modular longitudinal member
B1 Modular longitudinal member
C Modular members (number dependent on installation diagram)
D Modular auxiliary member
D60.10-0021-01
D60.10-0020-01
Fig. item, etc. | Work instructions | ||
C, D | Align Celette modular members according to the hole pattern of the straightening bench (1) and secure with countersunk screws (3) (the number of modular members (C) depends on the relevant installation diagram) | The modular members can be used on all Celette straightening benches approved by MB. The straightening bench is split in the longitudinal direction into grid areas. The grid areas are marked with numerals (arrow) on the side flange of the straightening bench | |
A1, B1 | Align modular longitudinal members A1 and B1 according to the hole pattern of the front base plate of the straightening bench and attach countersunk screws (3) | ||
2 | Connect the modular longitudinal members A1 and B1 with the assembly strips (2) and tighten |