W54.30-0004-01
Operator buttons of vehicle diagnosis system:
1 System button
2 Quit button
3 Info button
4 Reset button
Messages on green indicator panel of display:
5 FSS display (WS)
6 Display, K-module part no.
7 Display, programming process running
Maintenance acc. to time
12.4.98
5
INS K-module
0004460022
6
INS Wait!
7
Learn-in | |||
1 | Switch on ignition | ||
2 | Press system button (1) several times | Until display readout (5) appears in green indicator panel of display (FSS system (WS)). | |
3 | Press info button (3) several times | Until display readout (6) appears. | |
4 | Hold reset button (4) down and press quit button (2). Initially display readout (7) appears and display readout (6) appears again after a few seconds. | – During the programming process all the parameters are taken over from the n-module. – If no parameters are stored in the n-module, no programming process ensues (the display readout appears again immediately once the buttons are released) |