AR54.25-T-2805BB | Removing and installing operating lever for engine control and continuous brake | 2.11.01 |
MODEL NMB613.358 /388, 671.015 /020 /021 /030 /042 /332 /333
with pneumatically adjustable steering column
T54.25-0086-11
Shown on model 613.388
1 Electrical line
2 Screw
3 Operating lever, engine control and permanent brake
| Removal/installation | ||
1.1 | Remove bottom section of dashboard on driver's side | Only on model 613.358/388 | |
2 | Remove steering column cover | ||
3 | Remove all tie straps (arrows) along the electrical line (1) for the operating lever, engine control and permanent brake (3) | Installation: Install new tie straps. | |
4 | Separate electrical connector of electrical line (1) for the operating lever, engine control and permanent brake (3) | The electrical connector is located in the footwell. | |
5 | Unscrew bolts (2) and remove operating lever for engine control and permanent brake (3) | If necessary, remove the steering wheel on models 613.358/388: | |
Remove/install steering wheel | |||
6 | Install in the reverse order | ||
7 | Perform a function test |